Front And Rear Maintenance Outdoor Aluminum Module Cabinet LED Display Screen

This is an outdoor aluminum LED display built around a single, proven cabinet size 960×960 mm in die-cast aluminum, for the installations that sit in full sun and cannot afford to wash out at noon. Brightness on the outdoor version runs past 6,000 nits, so the image stays readable in direct daylight and gets plenty of headroom at night. The series is available in five pixel pitches, P4.44, P5.7, P6.67, P8 and P10, which covers everything from a close-viewed storefront facade to a highway-side billboard.

The cabinets are serviceable from both the front and the rear: wall-mounted screens can be repaired from the front without dismantling the whole wall, while truss and temporary builds can use rear access.

A 3840Hz refresh rate keeps the picture steady on camera, and the whole system is CE certified. All you add is the content.

Features

• Aluminum cabinet and Aluminum housing modules

• Energy saving design

• support both front and back service.

• suitable for hot and humid area

• slim cabinet design

• all parts front service, front install

Aluminum Housing Module

The LED modules are designed with a full aluminum housing material, allowing them to operate normally under both high and low temperatures without distortion. The high protection material provides resistance to corrosion, fire, and environmental challenges.

Super Light weight die-casting cabinet

Aluminum die-casting panel

IP66 front and back high protection cabinet

Super light weight die-casting magnesium cabinet, 24kg per cabinet

Front Service Design

Outdoor Aluminum IP66 LED Screen features a Dual service with  front and rear design, allowing for quick installation and maintenance, while simaple lock technology simplifies assembly and module replacement.

High Protection

With an IP66 protection rating, it's built to withstand harsh outdoor conditions, including temperature extremes (from -40℃ to +80℃) and seaside environments, making it a reliable choice for diverse applications.

Bright enough for daylight, calm enough for night

There is a difference between an outdoor screen that works and one that works at midday. The outdoor version of this series is rated above 6,000 nits, which is the margin that keeps a picture visible when the sun is on the panel, not just in the shade, not just after sunset. At night, that same headroom means the screen can be dimmed down comfortably instead of blasting the street. If you have been burned by a cheaper screen that disappears between 11 a.m. and 3 p.m., this is the specification gap that fixes it.

One cabinet, two kinds of jobs

The 960×960 mm cabinet is something of a workhorse size in the outdoor display business, and this series is designed to pull double duty:

• Fixed installations — billboards, building facades, stadium and arena walls. Front service means the screen can be mounted flush against a wall or structure, with no need for a maintenance catwalk behind it.

• Temporary and semi-permanent builds — outdoor stages, event backdrops, exhibition screens that go up and come down. The die-cast aluminum body and fast, tool-friendly locks keep assembly times short.

Die-cast aluminum is what makes both jobs practical. It keeps each cabinet light enough for a small crew to handle, rigid enough that the front face stays flat across the wall, and precise enough that neighbouring cabinets align with tight, even seams.

Sharp to the camera, not just to the eye

The outdoor series runs a 3840Hz refresh rate. If your screen will ever appear on a broadcast or be filmed by phones and cameras, a stadium screen during a match, a stage backdrop at a festival, a billboard filmed for a brand video, high refresh is the difference between clean footage and visible scanning lines. Combined with the brightness range, the panel is built to be photographed as much as watched.

Specification

Application

• Outdoor advertising billboards and roadside digital signage

• Stadiums, arenas and sports venues, including scoreboard and perimeter walls

• Building facades and architectural media walls

• Outdoor stages, festivals and brand events

• Petrol station and drive-thru menu boards, transport hubs and public squares.

FAQ

Q1: Can this screen really be repaired from the front?

Yes. The modules release from the front of the cabinet, which is the standard way to maintain a wall-mounted outdoor screen, where there is no walkway behind it. The same cabinet also opens from the rear when space allows, so you get both access options on one product.

Q2: What difference does 6,000+ nits make in practice?

It keeps the picture readable in direct sunlight. Many lower-spec outdoor screens look fine at night but wash out during the day; the extra brightness on this series is exactly the margin that fixes that, and at night the screen can be dimmed to a comfortable level instead of running at full power.

Q3: Which pixel pitch should I order?

It depends mainly on viewing distance. As a rough guide, P4.44 suits close viewing under about 5 meters, P6.67 covers typical outdoor signage from around 7 meters, and P8–P10 are for billboards and large venue walls seen from further away. Send us your distance and screen size and we will confirm the right option.

Q4: Is this cabinet for fixed installation or rental use?

Both. The 960×960 die-cast cabinet with quick assembly is a common choice for temporary builds, while front serviceability makes the same panel practical for permanent wall-mounted installations. Tell us how the screen will be mounted and we will confirm the matching rigging or mounting hardware.

Q5: Why does a 3840Hz refresh rate matter for my project?

If the screen will be filmed, a live match, a concert stream, or a brand video shot in front of the wall, a higher refresh rate reduces the visible scan lines and flicker that cheap screens show on camera. It also gives smoother motion for fast-moving content.